Intellinet Power over Ethernet (PoE+) Splitter, IEEE802.3at, 5, 7.5, 9 or 12 V DC output voltage

€ 59.00
Способы получения товара и время
Забрать из офиса Rīga, Elijas iela 21, LV-1050
31 Июль
€ 0.00
Доставка по Латвии (доставка до квартиры)
03 Август
€ 12.99
Доставка курьером по Риге (доставка до подъезда)
03 Август
€ 6.99
Omniva
03 Август
€ 3.50
DPD pakubode
03 Август
€ 4.99
2 piedāvājumi no dažādiem piegādātājiem
€ 46.00
Piedāvājums 1
Noliktavā: 4
31 Июль
€ 59.00
Piedāvājums 2
Noliktavā: 7
31 Июль

Intellinet Power over Ethernet (PoE+) Splitter, IEEE802.3at, 5, 7.5, 9 or 12 V DC output voltage

Код магазина   9940056
Код производителя   560443
EAN   0766623560443
Есть на складе поставщика   7

Deliver Power over Ethernet to remote devices. _x000D_
_x000D_
The INTELLINET NETWORK SOLUTIONS PoE+ Splitter allows you to deliver both data and electrical power to non-PoE Ethernet-enabled products using the Cat5 Ethernet cable. Using the PoE Splitter, you can take advantage of Power over Ethernet and place Ethernet-enabled products, such as Network Cameras and Wireless Access Points*, where power outlets are not readily available. _x000D_
_x000D_
Simplify Installation for an Ethernet-based Device _x000D_
Having to manage only an Ethernet cable simplifies the physical installation of the device. Without having to worry about the availability of a power source, you can mount Ethernet-enabled products on a ceiling or outdoors, up to 100m (328 feet)** from a power source. The PoE Splitter is simple to install and requires no tools or software. _x000D_
_x000D_
802.3af Compliant Power over Ethernet _x000D_
The PoE Splitter can be used to complement any PoE injector unit or midspan switch to provide small to medium-sized businesses a complete end-to-end PoE solution. This unit supports 802.3af and 802.3at, ensuring compatibility with other 802.3af/t PoE-compliant injector units or PSE switches. _x000D_
_x000D_
Adjustable Power Output _x000D_
During the setup, the PoE Splitter can be set to power any compatible 5 V, 7.5 V, 9 V or 12 V Ethernet-enabled device via the volt selector located on the side. _x000D_
_x000D_
* Contact your INTELLINET NETWORK SOLUTIONS reseller for ordering information. _x000D_
** Maximum distance per 802.3u specifications.

- Can be used to connect non-PoE IEEE 802.3af/t-compliant devices to a PoE injector or PoE switch
- Output voltage, selectable: 5, 7.5, 9 or 12 V DC
- Power output: 5 V / 4 A, 7.5 V / 2.7 A, 9 V / 2.3 A and 12 V / 1.7 A
- 10/100 auto-sensing input port automatically detects optimal network speeds
- RJ45 input port with Auto-MDIX and NWay auto-negotiation support
- Full/half duplex operation
- Compact metal case
- LED for link on PoE input port
- Three-Year Warranty