Kathrein EXR 2508 satellite multiswitch 5 inputs 8 outputs

Kathrein EXR 2508 satellite multiswitch 5 inputs 8 outputs

- Multi-switch for eight connections, with an integrated power supply unit
- Low power consumption due to highly efficient, short-circuit proof switched-mode power supply unit and energy-saving concept (each multi-switch line is powered by the receiver connected to it and is thus switched off whenever the receiver is switched off)
- Kathrein-Power-Saving: LNB supply is switched off as soon as connected to the EXE 2508 or not other receiver is used in the cascade.
- This feature can be disabled, for example if loop-through multi-switches are used without Kathrein Power Saving in the cascade
- Cascadable with EXR 2554/2558

- Cascadable multi-switches for distribution of four Sat polarities and terrestrial signals to many receivers
- Only one drop cable is required per receiver (for twin receivers two drop cables are required)
- Option to select horizontal/vertical, low band/high band from each receiver
- Switch-over is effected over the coaxial cable with 14/18 V and 0/22 kHz signal frequency
- Integrated amplifier ensures low tap losses in the Sat-IF range
- Integrated pre-emphasis to equalise the cable loss
- Terrestrial signals can be received even when the satellite receiver is switched off
- Terrestrial range: 5-862 MHz passive
- High inter-output isolation
- Remote feeding over the input horizontal low. All other inputs are voltage-free (enabling operation with the UAS 585)
- For indoor installation