|
|
A remarkable outdoor switch for setting up an optical 10G network that can even perform some light routing. The spiritual successor to the beloved FiberBox. Gigabit Ethernet, SFP/SFP+, PoE.
netFiber 9 is a powerful outdoor switch with SFP, SFP+, and Gigabit Ethernet. It features a powerful ARM v7 CPU, 256 MB of RAM, 4x 10G SFP+ ports, and an advanced Marvell switch-chip that can handle even the heaviest loads. The Gigabit Ethernet port is not just for management purposes. It has a direct connection to the switch chip – so you can enjoy full gigabit speed. This port also supports PoE-in, so you don’t have to rely on the DC jack for powering in tight, hard- to-reach spots.
There is a console port, followed by five regular SFP ports and four SFP+ ports for that sweet 10 Gbps networking. This means there might be quite a lot of wires for you to organize at some point. That’s why we designed the case to have some handy little additional features on the bottom of the case to help you keep everything neat and tidy.
The sturdy case provides decent protection in dusty environments with occasional splashes of water. Perfect for outdoors with some light coverage – like a roof overhang or a simple cabinet. There is a massive heatsink on the back that serves two purposes. Not only it provides outstanding heat dissipation, it also moves the center of mass towards the side with all the mounting options – keeping the board firm and strong upon installation. The package includes metal hose clamps and screws, so you can attach the netFiber to a pole, wall, or mast right away.
netFiber 9 is an amazing tool for anyone working with connections over 100 meters while keeping data loss and ping low. Optic fiber can be a great alternative to copper if you are worried about electromagnetic interference or maybe even tampering and eavesdropping. With 10 ports, a powerful CPU, and a rugged case, netFiber 9 is a real bargain that will make your network management so much easier!
| Warranty (months) | 12 |
| Packaging quantity | 1 |
| Summary | Mikrotik netFiber 9. Тип RJ-45 Ethernet портов для основного подключения: Gigabit Ethernet (10/100/1000), Количество RJ-45 Ethernet портов для основного подключения: 1. Входящее напряжение постоянного тока: 18 - 57 V. Разьъм питания: Гнездо для постоянного тока. Питание по Ethernet (PoE) |
| Vendor Homepage | https://mikrotik.com/product/netfiber_9#fndtn-specifications |
| Category Code | SWI |
| Unit Box Height | 0.09 |
| Unit Box Length | 0.36 |
| Unit Box Width | 0.36 |
| Количество RJ-45 Ethernet портов для основного подключения | 1 |
| Количество слотов для SFP модулей | 5 |
| Количество слотов для SFP+ модулей | 4 |
| Разьъм питания | Гнездо для постоянного тока |
| Тип RJ-45 Ethernet портов для основного подключения | Gigabit Ethernet (10/100/1000) |
| Скорость передачи данных Ethernet LAN | 10,100,1000 |
| International Protection (IP) код | IP54 |
| Цвет товара | Белый |
| Встроенный процессор | Да |
| Модель процессора | 98DX226S |
| Оперативная память | 256 |
| Среднее время наработки на отказ | 200000 |
| Тактовая частота процессора | 800 |
| Тип памяти | DDR3-SDRAM |
| Флэш-память | 16 |
| Входящее напряжение постоянного тока | 18 - 57 |
| Источник питания | Постоянный ток |
| Максимальное потребление энергии | 16.3 |
| Питание по Ethernet (PoE) | Да |
| Диапазон температур при эксплуатации | -40 - 70 |
| Высота | 71 |
| Глубина | 212 |
| Ширина | 304 |
| Compliance certificates | CE/RoHS |
| Модель | netFiber 9 |